COMMON REMOVAL PROCEDURES
3.2.8 IMAGE TRANSFER UNIT
1. Cover the floor or a table with paper to prepare a place to put the image
transfer unit.
2. Open the front door.
3. Remove the toner hopper then push the hopper rails into the machine.
(!3.2.7)
4. Rotate the transfer belt release lever [A] down to the left until it stops.
5. Remove the faceplate [B] ( x1, x5).
6. Rotate the lever B2 [C] on the drawer unit counter-clockwise to separate the
transfer roller from the ITB.
B132/B200
[B]
[C]
[A]
3-18
B132R201.WMF
SM