Show Mac-Address-Table Staticfiltering - Cisco Small Business 200 Series User Manual

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command
macfilter adddest
all
show mac-
address–table
static filtering

show mac-address-table staticfiltering

Use this command to display the Static Multicast Filtering entries in the Multicast
Forwarding Database (MFDB) table.
show mac-address-table staticfiltering
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(Switch) #show mac-address-table staticfiltering
MAC Address
-----------------------
00:01:55:33:00:00:00:01
Related Commands
Command
macfilter
macfilter adddest
all
Description
Adds all the ports to the destination filter set for the MAC
filter with the given MAC address or IP address, and
VLAN ID.
Displays the Static Multicast Filtering entries in the
Multicast Forwarding Database (MFDB) table.
Type Description
------- ----------------
Static Mgmt Config
Description
Adds a static filter entry with MAC-layer station source
address or IP Group Address.
Adds all the ports to the destination filter set for the MAC
filter with the given MAC address or IP address, and
VLAN ID.
7
Interfaces
-------------------
Fwd: e2,e4
300