Lldp Med Transmit-Tlv - Cisco Small Business 200 Series User Manual

VLAN Management
LLDP-MED
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
lldp med location-
tlv co-ordinate
lldp med location-
tlv civic-addr
lldp med location-
tlv elin-addr
show lldp med
location-tlv

lldp med transmit-tlv

Use this command to specify which optional Type Length Values (TLVs) in the
LLDP-MED set are transmitted in the Link Layer Discovery Protocol Data Units
(LLDPDUs). You can enter the command with no optional key words to include all
TLV types.
Use the no form of the command to remove the TLV. You can enter the command
without any key words to remove all TLV types.
lldp med transmit-tlv
no lldp med transmit-tlv
Syntax Descriptions
Parameter
Capabilities
Inventory
Location
network-policy
Default
The capabilities and network policy TLVs.
Description
Sets the coordinate-based Location TLV, as defined by
RFC3825.
Sets the civic address-based Location TLV to specify the
location of the switch.
Sets the ELIN address-based Location TLV to specify the
emergency number.
Shows the details of the Location TLVs configured.
[ ][i
capabilities nventory
[ ][i
capabilities nventory
Description
Transmit the LLDP-MED capabilities TLV.
Transmit the LLDP-MED inventory TLV.
Transmit the LLDP-MED location TLV.
Transmit the LLDP-MED network policy TLV.
][l ][
ocation network-policy
][l ][
ocation network-policy
4
]
]
235