Spanning-Tree Mst Priority - Cisco Small Business 200 Series User Manual

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command
spanning-tree
mode
spanning-tree
mst vlan
spanning-tree
mst
show spanning-
tree mst
summary

spanning-tree mst priority

Use this command to set the priority for a particular spanning tree instance. Use
the no form of the command to remove the association. Use the no form of the
command to reset the priority of the specified instance to the default value
(32768.).
spanning-tree mst priority mstid mstpriority
no spanning-tree mst vlan mstid
Syntax Descriptions
Parameter
mstid
mstpriority
Default
mstpriority—32768
Command Modes
Global Config
Description
Configures the spanning-tree protocol.
Adds an association between a multiple spanning tree
instance and one or more VLANs so that the VLAN(s) are no
longer associated with the common and internal spanning
tree.
Sets the Path Cost or Port Priority for the specified port
within the multiple spanning tree instances or in the
common and internal spanning tree.
Displays summary information about all multiple spanning
tree instances in the switch.
Description
A number that identifies an MST instance.
The MST priority value in the range 0–61440. After
exchanging BPDUs, the switch with the lowest priority
value becomes the root bridge for the MST instance.
5
271