Speed All - Cisco Small Business 200 Series User Manual

Port Management
Switch Ports
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command

speed all

show port
speed all
Use this command to configure the speed of all Ethernet interfaces when not using
auto-negotiation.
speed all {100 | 10} {half-duplex | full-duplex}
Syntax Descriptions
Parameter
100 | 10
half-duplex | full
duplex
Command Modes
Global Config
Examples
The following command sets all ports to 100 Mbps full-duplex operation when
Auto Configuration is disabled.
(Switch) (config)#speed all 100 full-duplex
Related Commands
Command
speed
Description
Configures the speed of an Ethernet interface when not
using auto-negotiation.
Displays port information.
Description
Configures 100 Mbps or 10 Mbps operation.
Configures half-duplex or full-duplex port operation.
Description
Configures the speed of an Ethernet interface when not
using auto-negotiation.
3
178