Security
Dot1x
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
dot1x re-authentication
Use this command to enable periodic re-authentication of the client or to force an
immediate reauthentication of the client. To return to the default setting, use the no
form of this command.
dot1x re-authentication
no dot1x re-authentication
Syntax Descriptions
Parameter
force
Default
Periodic authentication is enabled.
Command Modes
Interface Config
Related Commands
Command
show dot1x
dot1x supplicant portcontrol
Use this command to configure the authentication mode for supplicant on the
interface. Use the no form of the command to reset it to the default mode (auto).
dot1x supplicant portcontrol {force-unauthorized | force-authorized | auto}
no dot1x supplicant portcontrol
[
]
force
Description
Initiates reauthentication instantly. If this keyword is not
specified, then reauthentication occurs when the timeout
period expires, as specified by the dot1x timeout reath-
period command.
Description
Shows a summary of the global 802. 1 X configuration,
summary information of the 802. 1 X configuration for a
specified port or all ports, the detailed 802. 1 X
configuration for a specified port, and the 802. 1 X statistics
for a specified port.
8
348