Port Management
Link Aggregation
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Syntax Descriptions
Parameter
all
Default
By default all LAGs are administratively enabled.
Command Modes
Global Config
Related Commands
Command
show port-
channel brief
show port
channel
port-channel load-balance
This command selects the load-balancing option used on a LAG. Traffic is
balanced on a LAG by selecting one of the links in the channel over which to
transmit specific packets. The link is selected by creating a binary pattern from
selected fields in a packet and associating that pattern with a particular link. Use
the no form of the command to reset it to the default value.
port-channel load-balance {1 | 2} {interface | all}
no port-channel load-balance {interface | all}
Description
Configures all LAGs with the same administrative mode
setting.
Description
Displays the static capability of all LAG interfaces on the
device as well as a summary of individual LAG interfaces.
Displays an overview of all port-channels (LAGs) on the
switch.
3
206