Telnetcon Timeout - Cisco Small Business 200 Series User Manual

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
• line—Character mode
• noecho—Disabled
Command Modes
Privileged Exec
Related Commands
Command
ip telnet server
enable
show network
show telnetcon

telnetcon timeout

Use this command to set the Telnet connection session timeout value in minutes. A
session is active as long as the session has not been idle for the value set. Use the
no form of this command to reset the timeout to the default.
telnetcon timeout 1-160
no telnetcon timeout
Syntax Descriptions
Parameter
1-160
Default
timeout—5 minutes
Command Modes
Privileged Exec
Description
Enables Telnet connections to the system and enables the
Telnet Server Admin Mode.
Displays configuration settings associated with the
switch's management interface.
Displays Telnet configuration and status information.
Description
The timeout value in minutes.
2
78