VLAN Management
Auto-VoIP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command
auto-voip oui-
prioirity
show auto-voip
oui-based
auto-voip protocol-based
Use this command to enable the protocol-based VoIP Profile on an interface. Use
the no form of the command to disable the profile.
auto-voip protocol-based
no auto-voip protocol-based
Default
The protocol-based VoIP profile is disabled on all interfaces.
Command Modes
Interface Config
Related Commands
Command
auto-voip
protocol-based
all
show auto-voip
protocol-based
show auto-voip
sessions
auto-voip protocol-based all
Use this command to enable the protocol-based VoIP profile on all switch
interfaces. Use the no form of the command to disable the profile.
auto-voip protocol-based all
no auto-voip protocol-based all
Description
Configure the class-of-service priority assigned to OUI-
based VoIP traffic.
Displays the VoIP Profile settings on the interface or
interfaces.
Description
Enables the VoIP Profile on all the interfaces of the switch.
Displays the VoIP Profile settings on the interface or
interfaces of the switch.
Displays the currently running Auto-VoIP sessions on an
interface or interfaces.
4
247