Lldp Med Transmit-Tlv All - Cisco Small Business 200 Series User Manual

Administration
PoE
Cisco Small Business 200E Series Advanced Smart Switch Command Reference

lldp med transmit-tlv all

Use this command to specify the optional Type Length Values (TLVs) in the LLDP
MED set transmitted in the Link Layer Discovery Protocol Data Units (LLDPDUs) for
all ports. Use the no form of the command to exclude the specified TLV for all the
ports.
lldp med transmit-tlv all [capabilities] [ex-pse] [inventory] [location] [network-
policy]
no lldp med transmit-tlv all [capabilities] [ex-pse] [inventory] [location] [network-
policy]
Syntax Descriptions
Parameter
capabilities
ex-pse
inventory
location
network-policy
Default
No LLDP capabilities are advertised.
Command Modes
Global Config
Examples
The following example includes the network policy TLV in LLDP advertisements on
all ports.
(Switch) (Config)#lldp med transmit-tlv all network-policy
Description
Includes the switch capabilities TLV in LLDP
advertisements.
Includes the extended power sourcing equipment TLV in
LLDP advertisements. This keyword is available only on
switches that support PoE.
Includes the switch inventory TLV in LLDP advertisements.
Includes the switch location TLV in LLDP advertisements.
Includes the switch network policy TLV in LLDP
advertisements.
2
40