Cisco Small Business 200 Series User Manual page 359

Security
Dot1x
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Authenticator PAE State........................ Initialize
Port Status.................................... Authorized
Backend Authentication State................... Initialize
Quiet Period (secs)............................ 60
Transmit Period (secs)......................... 30
Supplicant Timeout (secs)...................... 30
Server Timeout (secs).......................... 30
Maximum Requests............................... 2
Reauthentication Period (secs)................. 3600
Reauthentication Enabled....................... TRUE
Key Transmission Enabled....................... FALSE
Session Timeout................................ 0
Session Termination Action..................... Default
Port
Protocol Version
PAE Capabilities
Control Mode
Authenticator
PAE State
Port Status
Backend
Authentication
State
Quiet Period
Transmit Period
The interface whose configuration is displayed.
The configured control mode for this port. Possible values
are force-unauthorized | force-authorized | auto | authorized |
unauthorized.
Indicates whether the port can act as an Authenticator or
Supplicant.
The control mode under which this port is operating.
Possible values are auto, force authorized, and force
unauthorized.
Current state of the authenticator PAE state machine.
Possible values are Initialize, Disconnected, Connecting,
Authenticating, Authenticated, Aborting, Held,
ForceAuthorized, and ForceUnauthorized.
Indicates whether the port is authorized or unauthorized.
Possible values are authorized | unauthorized.
Current state of the backend authentication state machine.
Possible values are Request, Response, Success, Fail,
Timeout, Idle, and Initialize.
The timer used by the authenticator state machine on this
port to define periods of time in which it will not attempt to
acquire a supplicant. The value is expressed in seconds and
will be in the range 0–65535.
The timer used by the authenticator state machine on the
specified port to determine when to send an EAPOL EAP
Request/Identity frame to the supplicant. The value is
expressed in seconds and will be in the range of 1–65535.
8
359