Show Sntp Configuration - Cisco Small Business 200 Series User Manual

Administration
SNTP and Time Settings
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
show sntp
sntp client mode
show clock

show sntp configuration

Use this command to show SNTP settings.
show sntp configuration
Command Modes
Privileged Exec
Examples
The following shows sample output for the command.
(switch) #show sntp configuration
Polling interval: 8 seconds
MD5 Authentication keys:
Authentication is not required for synchronization.
Trusted keys:
No trusted keys.
Unicast clients: Disable
Unicast servers:
Server Auth-Key
--------- -----------
time-a.timefreq Disabled
.bldrdoc.gov
time-b.timefreq Disabled
.bldrdoc.gov
time-c.timefreq Disabled
.bldrdoc.gov
Description
Displays SNTP settings and status.
Enables Simple Network Time Protocol (SNTP) client
mode and sets the mode to either broadcast or unicast.
Displays the time and date from the system clock.
Polling
--------
Disabled
Disabled
Disabled
2
115