Administration
SNTP and Time Settings
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Default
SNTP authentication is disabled.
Command Modes
Global Config
Related Commands
Command
sntp server
sntp
authentication-
key
sntp authentication-key
Use this command to define an authentication key for SNTP. To remove the
authentication key, use the no form of this command.
sntp authentication-key [key-number] [md5 md5]
no sntp authentication-key [key-number]
Syntax Descriptions
Parameter
key number
md5
Default
No authentication key is configured.
Command Modes
Global Config
Description
Configures SNTP unicast servers.
Defines an SNTP authentication key.
Description
The value is used to encrypt and decrypt SNTP messages
to and from the server
Specifies that the MD5 algorithm is used for encrypting
the authentication key.
2
106