Macfilter Adddest All - Cisco Small Business 200 Series User Manual

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Syntax Descriptions
Parameter
mac-address
ip-address
vlan-id
Command Modes
Interface Config
Related Commands
Command
macfilter adddest
all
macfilter
show mac-
address-table
staticfiltering

macfilter adddest all

Use this command to add all the ports to the destination filter set for the MAC filter
with the given MAC address or IP address, and VLAN ID. Use the no form of the
command to remove all ports from the destination filter set.
macfilter adddest all {mac-address | ip-address} vlan-id
no macfilter adddest all {mac-address | ip-address} vlan-id
Description
The multicast MAC address, specified as a 6-byte
hexadecimal number in b1:b2:b3:b4:b5:b6 format.
An IPv4 address.
A valid VLAN.
Description
Adds all the ports to the destination filter set for the MAC
filter with the given MAC address or IP address, and
VLANID.
Adds a static filter entry with MAC-layer station source
address or IP Group Address.
Displays the Static Multicast Filtering entries in the
Multicast Forwarding Database (MFDB) table.
7
295