Serial Baudrate - Cisco Small Business 200 Series User Manual

Administration
Switch Management Access Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command

serial baudrate

serial databits
serial parity
serial stopbits
show serial
serial baudrate
Use this command to specify the communication rate of the console port. The
supported rates are 9600, 38400, and 115200. Use the no form of the command to
reset it to the default value.
serial baudrate {9600 | 38400 | 115200}
no serial baudrate
Default
baud rate—115200
Command Modes
Line (Console) Config Mode
Related Commands
Command
serial databits
serial parity
serial stopbits
show serial
Description
Specifies the communication rate of the console port.
Specifies the number of data bits per character for the
console connection.
Sets the parity for the console connection.
Sets the number of stop bits for the console connection.
Displays serial port communication settings.
Description
Specifies the number of data bits per character for the
console connection.
Sets the parity for the console connection.
Sets the number of stop bits for the console connection.
Displays serial port communication settings.
2
87