Radius Server Deadtime - Cisco Small Business 200 Series User Manual

Security
RADIUS
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
radius server host
show radius
servers

radius server deadtime

Use this command to improve RADIUS response times when servers are
unavailable. The switch will continue to send transaction requests to servers for
the specified time after they have been found to be unavailable. To set the
deadtime to 0, use the no form of this command.
radius server deadtime minutes
no radius server deadtime
Syntax Descriptions
Parameter
minutes
Default
minutes—0 minutes
Command Modes
Global Config
Related Commands
Command
radius server host
Description
Configures the IP address or DNS name of a RADIUS
server.
Displays summary data and details on RADIUS servers.
Description
The time in minutes a RADIUS server will be bypassed
after the switch determines it is unavailable. The range is
0–2000 minutes.
Description
Configures the IP address or DNS name of a RADIUS
server.
8
328