Fast Leave Mode; Group Membership Interval (Secs); Max Response Time (Secs); Multicast Router Expiry Time (Secs) - Cisco Small Business 200 Series User Manual

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Fast Leave Mode................................ Disabled

Group Membership Interval (secs)............... 260

Max Response Time (secs)....................... 10

Multicast Router Expiry Time (secs)............ 0

VLAN ID
MLD Snooping
Admin Mode
Fast Leave
Mode
Group
Membership
Interval
Maximum
Response Time
Multicast
Router Expiry
Time
Related Commands
Command
set mld
set mld fast-leave
set mld
groupmembershi
p-interval
set mld
maxresponse
The VLAN ID.
Indicates whether MLD Snooping is active on the VLAN.
Indicates whether MLD Snooping Fast-leave is active on the
VLAN.
The amount of time in seconds that a switch will wait for a
report from a particular group on a specific interface, which
is participating in the VLAN, before deleting the interface
from the entry. This value might be configured.
The amount of time the switch waits after it sends a query
on an interface, participating in the VLAN, because it did not
receive a report for a particular group on that interface. This
value might be configured.
The amount of time to wait before removing an interface
that is participating in the VLAN from the list of interfaces
with multicast routers attached. The interface is removed if
a query is not received. This value might be configured.
Description
Enables MLD Snooping on a particular VLAN and enables
MLD Snooping on all interfaces participating in a VLAN.
Enables MLD Snooping fast-leave admin mode on a
selected interface or VLAN.
Sets the MLD Group Membership Interval time on a VLAN.
Sets the IGMP Maximum Response time on a particular
VLAN.
7
322