Admin Mode; Vlan Id; Igmp Snooping Admin Mode - Cisco Small Business 200 Series User Manual

Multicast
Cisco Small Business 200E Series Advanced Smart Switch Command Reference

VLAN ID

IGMP Snooping

Admin Mode

Fast Leave
Mode
Group
Membership
Interval
Maximum
Response Time
Multicast
Router Expiry
Time
Related Commands
Command
set igmp
set igmp fast-
leave
set igmp
groupmembershi
p-interval
set igmp
maxresponse
set igmp
mcrtrexpiretime
The VLAN ID.
Indicates whether IGMP Snooping is active on the VLAN.
Indicates whether IGMP Snooping Fast-leave is active on
the VLAN.
The amount of time in seconds that a switch will wait for a
report from a particular group on a specific interface, which
is participating in the VLAN, before deleting the interface
from the entry. This value might be configured.
The amount of time in seconds the switch waits after it
sends a query on an interface, participating in the VLAN,
because it did not receive a report for a particular group on
that interface. This value might be configured.
The amount of time in seconds to wait before removing an
interface that is participating in the VLAN from the list of
interfaces with multicast routers attached. The interface is
removed if a query is not received. This value might be
configured.
Description
Enables IGMP snooping on a particular VLAN.
Enables or disable IGMP Snooping fast-leave admin mode
on a selected VLAN.
Sets the IGMP Group Membership Interval time on a VLAN.
Sets the IGMP Maximum Response time on a particular
VLAN.
Sets the Multicast Router Present Expiration time.
7
310