Storm-Control Broadcast Rate - Cisco Small Business 200 Series User Manual

Port Management
Flow Control and Storm Control
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Default
broadcast level—10%.
Command Modes
Interface Config
Global Config
Related Commands
Command
storm-control
broadcast
storm-control
broadcast rate
show storm-
control

storm-control broadcast rate

This command enables and configures the broadcast storm recovery threshold for
an interface or all interfaces as packets per second. If broadcast storm recovery is
active and the rate of Layer 2 broadcast traffic ingressing on an interface exceeds
the configured threshold, the traffic is dropped. In Global Config mode the same
rate is set on all ports.
Use the no form of command to delete the threshold.
storm-control broadcast rate 0-14880000
no storm-control broadcast rate
Syntax Descriptions
Parameter
0–14880000
Description
Enables or disables broadcast storm recovery mode for an
interface or all interfaces.
Configures the broadcast storm recovery threshold for an
interface or all interfaces.
Shows storm control configuration on a port or on all ports.
Description
The broadcast traffic rate, in number of packets per
second, above which traffic is dropped.
3
190