Using A Space In A Command; Command Modes - Cisco Small Business 200 Series User Manual

Using the Command Line Interface

Using a Space in a Command

Using a Space in a Command

Command Modes

NOTE
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
To include a space in a string, enclose the string in quotes, such as "
Example:
#set contact "Thom Dobro"
Modes group commands according to the function of each command. The
commands in a particular mode are not available until you change to that mode.
The command prompt changes in each command mode to identify the current
mode. The following table describes the command modes and the prompts for
that mode.
In the following table, the word switch in the prompt represents the switch
hostname. By default, the hostname is switch<
You can use the set hostname command to configure a different hostname that will
display in the CLI prompt.
Command Mode
Privileged EXEC
Global Config
VLAN Config
Interface Config
Access List Config
Prompt
switch#
switch (Config)#
switch (Vlan)#
(switch) (Interface
interface)#
switch(config-macal)#
string space
last three bytes of the MAC address
Description
The show commands that
display status and statistics,
some configuration commands,
and access to the Global
Config and VLAN Config
modes.
General setup commands and
modifications to the running
configuration.
VLAN configuration commands.
Manage the interfaces.
Switch management access list
configuration commands.
1
".
>.
18