Show Auto-Voip Sessions - Cisco Small Business 200 Series User Manual

VLAN Management
Auto-VoIP
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Parameter
all
Command Modes
Privileged Exec
Examples
The following example shows command output.
(switch) #show auto-voip protocol-based interface e1
Interface Auto VoIP Mode Traffic Class Port Status
--------- -------------- ------------- -----------
e1 Enabled
AutoVoIP Mode
Traffic Class
Port Status
Related Commands
Command
auto-voip
protocol-based
auto-voip
protocol-based
all
show auto-voip
sessions

show auto-voip sessions

Use this command to display the currently running protocol based Auto-VoIP
sessions on all switch interfaces.
show auto-voip sessions
Description
Shows Auto VoIP information for all ports.
7
The Auto VoIP mode on the interface.
The CoS Queue or Traffic Class to which all VoIP traffic is
mapped. This is not configurable and defaults to the highest
CoS queue available in the system for data traffic.
The operational status of the port.
Description
Enables the VoIP Profile on an interface.
Enables the VoIP Profile on all the interfaces of the switch.
Displays the currently running Auto-VoIP sessions on an
interface or interfaces.
Up
4
251