Spanning-Tree Port Mode All; Spanning-Tree Priority - Cisco Small Business 200 Series User Manual

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference

spanning-tree port mode all

Use this command to enable the spanning tree administrative mode for all ports.
To disable it, use the no form of this command.
spanning tree port mode all
no spanning tree port mode all
Default
Spanning tree is enabled on all ports.
Command Modes
Global Config
Related Commands
Command
spanning-tree
spanning-tree
port mode
show spanning-
tree
show spanning-
tree brief
show spanning-
tree interface

spanning-tree priority

Use this command to configure the spanning tree bridge priority for the common
and internal (CST) spanning tree instance (instance 0). The priority value
determines which bridge is elected as the root bridge. To reset the priority to the
default value, use the no form of this command.
spanning tree priority mstid 0-61440
no spanning tree priority
Description
Enables the operation mode of spanning tree.
Enables the spanning tree administrative mode on a specific
port.
Displays spanning tree settings for the common and internal
spanning tree.
Displays spanning tree settings for the bridge.
Displays spanning tree settings and parameters for an
interface.
5
274