Spanning-Tree Mst Instance - Cisco Small Business 200 Series User Manual

Spanning Tree Protocol
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command
show spanning-
tree mst port
summary
show spanning-
tree mst
summary

spanning-tree mst instance

Use this command to add a multiple spanning tree instance to the switch. Use the
no form of this command to remove a multiple spanning tree instance from the
switch and reallocate all VLANs allocated to the deleted instance to the common
and internal spanning tree.
spanning-tree mst instance mstid
no spanning-tree mst instance
Syntax Descriptions
Parameter
mstid
Command Modes
Global Config
Related Commands
Command
spanning-tree
configuration
name
spanning-tree
configuration
revision
Description
Displays the settings of one or all ports within the specified
multiple spanning tree instance.
Displays summary information about all multiple spanning
tree instances in the switch.
Description
A number within a range of 1 to 4094, that identifies the
new instance ID to be added/removed.
Description
Sets the MST Configuration Identifier Name, which
identifies the configuration that the switch is currently using.
Sets the MST Configuration Identifier Revision Level, which
identifies the configuration that the switch is currently using.
5
270