Dot1X Pae - Cisco Small Business 200 Series User Manual

Security
Dot1x
NOTE
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Syntax Descriptions
Parameter
interface
all
Command Modes
Privileged Exec
Related Commands
Command
show dot1x

dot1x pae

Use this command to enable the authenticator or supplicant mode on the interface.
Use the no form of the command to reset it to the default role (authenticator).
An interface can be an authenticator or a supplicant, but not both.
dot1x pae {authenticator | supplicant}
no dot1x pae
Syntax Descriptions
Parameter
authenticator
Description
The interface for which to clear statistics.
Clears statistics for all interfaces.
Description
Shows a summary of the global 802. 1 X configuration,
summary information of the 802. 1 X configuration for a
specified port or all ports, the detailed 802. 1 X
configuration for a specified port, and the 802. 1 X statistics
for a specified port.
Description
The port must be authenticated before it permits other
nodes on the network to use the services it provides
access to. The authenticator relays supplicant requests
and credentials to an authentication server, and authorizes
or denies access to the supplicant.
8
344