VLAN Management
LLDP-MED
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
lldp med location-tlv co-ordinate
Use this command to set coordinate-based Location Type Length Values (TLVs),
as defined by RFC3825. Use the no form of the command to clear the location
details.
lldp med location-tlv co-ordinate value
no lldp med location-tlv co-ordinate
Syntax Descriptions
Parameter
value
Command Modes
Global Config
Related Commands
Command
lldp med location-
tlv civic-addr
lldp med location-
tlv elin-addr
show lldp med
location-tlv
lldp med location-tlv civic-addr
Use this command to set the civic address-based Location TLV . Use the no form
of the command to clear the location details.
lldp med location-tlv civic-addr country country-code CA-type CA-value
]
value
Description
The location coordinates expressed as 16 octets in
hexadecimal, as follows:
xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx
Refer to RFC 3825 for details.
Description
Sets the civic address-based Location TLV to specify the
location of the switch.
Sets the ELIN address-based Location TLV to specify an
emergency number.
Shows the details of the Location TLVs configured.
4
[
CA-type CA-
231