Servo Drive Specifications; Specifications; General Specifications - Omron SMARTSTEP 2 SERIES User Manual

3-1 Servo Drive Specifications

3Specifications

3-1 Servo Drive Specifications

Select the Servo Drive matching the Servomotor to be used.
(For details, refer to Servo Drive-Servomotor Combinations on page 2-2.)
3

General Specifications

Ambient operating temperature
Ambient operating humidity
Ambient storage temperature
Ambient storage humidity
Storage and operating
atmosphere
Vibration resistance
Impact resistance
Insulation resistance
Dielectric strength
Altitude
Protective structure
Interna-
tional
stan-
dards
Note 1. The above items reflect individual evaluation testing. The results may differ under compound
Note 2. Depending on the operating conditions, some Servo Drive parts will require maintenance.
Note 3. The service life of the Servo Drive is 50,000 hours at an average ambient temperature of
3-1
Item
0 to 55°C, 90% RH max. (with no condensation)
−20 to 65°C, 90% RH max. (with no condensation)
No corrosive gasses, no dust, no iron dust, no exposure to moisture
or cutting oil
10 to 60 Hz; acceleration: 5.9 m/s
Acceleration of 19.6 m/s
Between power supply/power line terminals and frame ground:
0.5 MΩ. min. (at 500 VDC)
Between power supply/power line terminals and frame ground:
1,500 VAC for 1 min at 50/60 Hz
Between each control signal and frame ground: 500 VAC for 1 min
1,000 m above sea level max. (860 hp min.)
Built into panel (IP10).
EMC EN 55011 class A group 1
Directive EN 61000-6-2
EC
Direc-
Low
tives
Voltage EN 50178
Directive
UL standards UL 508C
cUL standards cUL C22.2 No.14
conditions.
Refer to Servo Drive Service Life on page 8-18 in the User's Manual for details.
40°C at 80% of the rated torque (excluding axial-flow fan).
Never perform withstand-voltage or other megameter tests on the Servo
Drive.
Specifications
2
max. 3 times each in X, Y, and Z directions.
WARNING
2
(0.6 G) max.