Terminal Mp (Pulse/Pwm Output) - Omron MX2 Series User Manual

(Example 2) A015/A165 = 01 (0 Hz)
Maximum frequency
A012/A102/A162
A011/A101/A161
7-3-6

Terminal MP (Pulse/PWM Output)

The terminal MP provides 10-VDC pulse output or PWM output.
The terminal MP on the control circuit terminal block enables the monitoring of the output frequency
and the output current.
MP Selection
Select the signal you want to output from the following table.
For pulse output signals (03, 08, 15), use a digital frequency counter. For other output signals, use an
analog meter.
Parameter Function
No. name
MP
C027
Selection
Multi-function Compact Inverter 3G3MX2-V1 User's Manual (I585-E1)
0 A013/ A014/ 100%
A103/ A104/
A163 A164
(0 V) (10 V)
(0 mA) (20 mA)
(VR min.) (VR max.)
Data Description
00
Output frequency
01 Output current
*3
02
Output torque
03
Digital output frequency
04 Output voltage
05 Input power
06 Electronic thermal load rate
07
LAD frequency
08 Digital current monitor
10 Cooling fin temperature
12 DriveProgramming (YA(0))
15 Pulse train input monitor
Option (No applicable
16
Option)
Output frequency is 0 Hz for 0% to A013/A103/A163.
(A015/A105/A165 = 01 (0 Hz))
Analog input
(FV/FI)
PWM/
Pulse
*1 *2
PWM 0 to Maximum frequency [Hz]
PWM 0 to 200%
PWM 0 to 200%
*4
Pulse 0 to Maximum frequency [Hz]
0 to 133%
PWM
(Example: For 200-V class, 7.5 V
at 200 V)
PWM 0 to 200%
PWM 0 to 100%
*1
PWM 0 to Maximum frequency [Hz]
Refer to MP Gain Setting on page
Pulse
7-28.
0 to 200°C (Outputs 0°C for 0°C or
PWM
lower)
Use DriveProgramming to set this
PWM
function. (0.00 to 100.00%)
Refer to MP Gain Setting on page
Pulse
7-28.
−
7 Other Functions
Full-scale value
−
7 - 27
7