3-3
Flow of Test Run
Perform a test run of the inverter according to the following flow.
Item
Installation
Wiring and con-
nections
Power-on
Display Status
Checks
Parameter Initial-
ization
Parameter Setting
No-load Run
Load Run
Operation
Multi-function Compact Inverter 3G3MX2-V1 User's Manual (I585-E1)
Description
Install the inverter according to the installation conditions.
Connect the inverter to the power supply and peripheral equipment.
Check the points mentioned in the next page before turning on the
power supply.
Check that there is no error in the inverter.
Initialize the inverter parameters.
Set the parameters required for the test run.
Run the motor with no-load via the Digital Operator.
Run the motor via Digital Operator, with the mechanical system con-
nected.
Basic settings (operation with the basic settings required to operate
and stop the inverter.)
Vector control (operation with the vector control and other functions.)
3 Operation and Test Run
Reference
Section 2,
2-1
Section 2,
2-10
Section 3,
3-4
Section
10
Section 5,
5-1
Section 5,
5-3, 5-4
Section 3,
3-1
Section 3,
3-1
Section 5
Section 6
3
3 - 21