Inverter Control Settings; Carrier Frequency - Omron MX2 Series User Manual

Mx2 series type v1 multi-function compact inverter
Hide thumbs Also See for MX2 Series:
Table of Contents

Advertisement

7-4

Inverter Control Settings

This section describes the carrier frequency function and the 1st/2nd control switching function, which
are related to the inverter control.
7-4-1

Carrier Frequency

Use this function to change the carrier frequency output from the inverter in a PWM waveform.
Set a higher carrier frequency value to reduce the metallic noise generated by the motor. If the inverter
generates a large sound due to resonance with the mechanical system or motor, you can effectively
avoid the resonance by setting the carrier frequency out of the resonance frequency range.
However, this results in an increase in electrical noise or leakage current from the inverter.
Parameter
Function name
No.
b083
Carrier Frequency
Related functions
• Derating of the output current may be required depending on the installation environment and the
Carrier Frequency (b083) setting. For derating of each inverter model, refer to A-1 Derating on page
A-2.
In the Electronic Thermal Level, set the output current value to be derated.
This setting, however, is unnecessary if the Electronic Thermal Level is already set to the derating
value or lower.
For details on the electronic thermal function, refer to 5-3-2 Electronic Thermal Function on page
5-16.
• Be aware that adjusting the carrier frequency exceeding the allowable derating level for the output
current may cause damage or shortened life expectancy of the inverter.
• The carrier frequency for DC injection braking can be set in A059. For details, refer to 7-9-1 DC Injec-
tion Braking (DB) on page 7-91.
• The table below shows the carrier frequency setting and its influence.
Carrier frequency
Noise from motor
Noise, leakage current
Torque
Carrier frequency: Low
Multi-function Compact Inverter 3G3MX2-V1 User's Manual (I585-E1)
Data
Heavy load mode (b049 = 00)
2.0 to 15.0
Light load mode (b049 = 01)
2.0 to 10.0
b089
Low
High
Large
Small
Small
Large
Slightly large
Slightly small
7 Other Functions
Default
data
10.0
2.0
Carrier frequency: High
Unit
kHz
7
7 - 31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents