Omron MX2 Series User Manual page 118

3 Operation and Test Run
Individual Input Mode (Direct Input or Selection)
If the parameter number or data is far away from the current value on the display, using the individual
input mode is efficient for changing the parameter data.
In the individual input mode, you can change the parameter number or data by selecting and entering a
value digit by digit.
Step 1: Press the Increment
and Decrement keys
simultaneously.
The most significant
digit is blinking.
The individual input mode is available on both the parameter display and the data display.
Parameter display
(A)
When the alphabetic digit
is blinking, press the Incre-
ment/Decrement key to
display the next/previous
letter.
Data display
(B)
When the tens digit is blink-
ing, press the Increment/
Decrement key to increase/
decrease the value.
Note 1. If you press the Mode key when the cursor (blinking digit) is at the leftmost digit, the cursor moves to the
rightmost digit.
2. If you press the Increment and the Decrement keys simultaneously in the individual input mode, the
mode returns to the normal input mode.
3. Changes are not reflected to the data when the data diplay blinks even if the data belong to the parameter group F.
3 - 10
Step 2: Move the blinking digit to the left
and right with the Mode and Enter
keys, then change the parameter
number with the Increment and
Decrement keys.
+1
Moves to left.
Moves to right.
−1
Press simultaneously.
When the hundreds digit is When the tens digit is
blinking, press the Incre- blinking, press the Incre-
ment/Decrement key to ment/Decrement key to
increase/decrease the increase/decrease the
value. value.
Specifying a non-existent parameter does not cause switch-
ing to the data display, but causes the leftmost digit to blink.
Press simultaneously.
When the ones digit is blink-
ing, press the Increment/
Decrement key to increase/
decrease the value.
Multi-function Compact Inverter 3G3MX2-V1 User's Manual (I585-E1)
Step 3: Press the Enter key
When the ones digit is
blinking, press the Incre-
ment/Decrement key to
increase/decrease the
value.
When the tenth digit is blink- When the hundredth digit is
ing, press the Increment/ blinking, press the Increment/
Decrement key to increase/ Decrement key to increase/
decrease the value. decrease the value.
when the least signifi-
cant digit blinks.
(A)
(B)