When The Add Staples Indicator Lights Up - Minolta EP2051 Operator's Manual

64
3.

When the Add Staples Indicator Lights Up

0.5~2.0
Auto
A4
Auto B4
Photo
Full Size
B4
Darker A3
/ Photo Full Size
A
Replacing the Staple Cartridge
1 Press the Lock Release Lever of the
Staple Sorter and slide it away from
the copier.
Open the Stapler Door.
2
While lifting the Lever upward, pull
3
the Staple Cartridge out of its port.
Pull the staple belt about 1" out of the
4
new Staple Cartridge and break off that
portion.
Auto
A3
A3
A3 B4
A4 FLS.
A4 Inch
A4
A4 A5
Paper
1151O073DA
1151O073DA
1139O0490A
1139O2190A
1139O0970A
When the staples will soon run out, the Add
Staples Indicator lights up.
Replace the Staple Cartridge with a new one by
following the procedure given below.
NOTE
Check that no portion of the staple bel
hangs out of the Cartridge. Break off
any portion of the belt that hangs out of
the Cartridge.
Insert the new Staple Cartridge until i
5
clicks into position.
Close the Stapler Door and slide the
6
Staple Sorter back against the copier.
1139O1350A
1139O1440A