8.3 Administrator Settings
8.3
Administrator Settings
Changing the administrator access code
This explains the method to specify or change the administrator access code.
To set the administrator access code
1
Follow the procedure described in "To display the Administrator Management
screens" on page 8-2 to display the Administrator Management screen.
2
Touch [Admin. 1], and then touch [Admin. Set].
3
Touch [Administrator Code Input].
4
Use the 10-Key Pad to type in the
administrator access code, and
then touch [Enter].
❍
To change an entered value,
touch [←] and [→] to move the
cursor to the desired position,
and then type in the new value.
❍
To erase the value at the
cursor's position, touch
[Delete].
❍
Press the [C] key to erase all
entered text.
❍
To return to the previous screen, touch [Cancel].
5
Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to
return to the Basics screen.
Di2010f/Di2510f/Di3010f/Di3510f
8
8-7