Maxtor NAS 6000 Administration Manual page 308

MaxAttach NAS 6000 Administration Guide
Gam_ev User_ev
Priority
ent ent
Number
Number Number
325 325 4
326 326 1
327 327 3
328 328 4
329 329 4
330 330 3
331 331 4
332 332 1
333 333 1
334 334 4
384 384 4
385 385 2
386 386 3
388 388 0
389 389 3
390 390 4
391 391 0
392 392 4
393 393 3
394 394 4
395 395 0
396 396 4
397 397 4
398 398 0
399 399 3
400 400 4
Chapter #14 - Appendix - Disk Array Error Codes
11/07/01 -- Revision 2.0.03A
Table #1 - Mylex Error Codes (Sheet 6 of 8)
Severity
Level
Information Power supply is not present.
Serious Temperature is over safe limit. Failure imminent.
Warning Temperature is above working limit.
Information Normal temperature has been restored.
Information Temperature sensor is not present.
Warning Enclosure access critical.
Information Enclosure access has been restored.
Serious Enclosure access is offline.
Serious Enclosure Soft Addressing Detected.
Information Enclosure services ready
Information Array management server software started successfully.
Error Write back error.
Warning Internal log structures getting full, PLEASE SHUTDOWN AND RESET THE
SYSTEM IN THE NEAR FUTURE.
Critical Controller is dead. System is disconnecting from this controller.
Warning Controller has been reset.
Information Controller is found.
Critical Controller is gone. System is disconnecting from this controller.
Information BBU Present.
Warning BBU Power Low.
Information BBU Power OK.
Critical Controller is gone. System is disconnecting from this controller.
Information Controller powered on
Information Controller is online.
Critical Controller is gone. System is disconnecting from this controller.
Warning Controller's partner is gone, controller is in failover mode now.
Information BBU reconditioning is started.
Chapter #14 - Appendix - Disk Array Error Codes
Description
288
Mylex Error Codes Table
000001628