MaxAttach NAS 6000 Administration Guide
from the Type of access list.
10. Choose OK.
To remove an NFS client
1.
On the primary navigation bar, choose Shares.
2.
On the Shares page, choose Shares.
3.
Select the share for which you want to remove an NFS client or client group.
4.
In the Tasks list, choose Properties.
5.
Select the General tab.
6.
Select the Unix (NFS) check box.
7.
Select the NFS Sharing tab.
8.
Select the desired client appliance or client group from the list in the center of the
page, and then choose Remove.
9.
Choose OK.
Setting FTP Share Properties
Use this page to specify which FTP clients are granted access to each share. Access can be
granted or denied on the basis of client host name.
To allow clients permission to an FTP share
1.
On the primary navigation bar, choose Shares.
2.
On the Shares page, choose Shares.
3.
Select the share for which you want to add FTP client access, and then choose
Properties.
4.
Select the FTP tab, and then:
Select the Read check box to allow read access.
n
—OR—
Select the Write check box to allow write access.
n
Chapter #8 - O/S 2.0 - Folders and Shares
11/07/01 -- Revision 2.0.03A
Chapter #8 - O/S 2.0 - Folders and Shares
200
Managing Shares
000001628