Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
11. Click OK to accept the changes.
12. Exit the Terminal Services session.
13. Click OK on the Shared Folders page to complete your changes.
Setting AppleTalk Share Properties
Use these instructions to specify sharing properties for an existing AppleTalk share.
Note that if the share does not exist, create the share first by following the procedures in Adding an
AppleTalk Share.
Setting AppleTalk Sharing Properties
Use these instructions to specify sharing properties for an existing AppleTalk share.
If the share does not yet exist, create the share first by following the procedures in Adding an Apple
Talk Share.
1.
On the primary navigation bar, choose Shares.
2.
On the Shares page, choose Shares.
3.
Check the checkbox of the share for which you want to add AppleTalk client access,
and then choose Properties from the Tasks list. The Share Properties of
<sharename> page displays.
4.
Click the AppleTalk Sharing tab. This opens a Terminal Services window.
5.
Click Yes to clear the warning message.
6.
Log into Windows 2000. The Shared Folders dialog box displays.
7.
In the Shared Folder pane, locate the share you want to modify.
Chapter #8 - O/S 2.0 - Folders and Shares
11/07/01 -- Revision 2.0.03A
NOTE
NOTE
Chapter #8 - O/S 2.0 - Folders and Shares
203
Managing Shares
000001628
Advertisement
Table of Contents
