Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
Clients that are not WINS-enabled can use WINS proxies to participate in these processes
in a limited way. If you are using a DHCP server to allocate WINS server IP addresses, you
do not need to add WINS server addresses.
Keep in mind that the Web UI only allows you to manipulate two WINS addresses, and
even then only if you statically assign the IP address for the adapter. If you have DHCP
enabled, you can remove one or two existing addresses and add different addresses, but you
will not be able to remove all WINS servers from a DHCP-enabled adapter. If you remove
two WINS addresses and do not add at least one, DHCP will automatically assign WINS
addresses.
WINS clients attempt to register their names with a WINS server when they start or join
the network. Thereafter, WINS clients query the WINS server as needed to resolve remote
names.
To change the WINS settings of the server appliance
1.
On the primary navigation bar, choose Network.
2.
Choose Interfaces.
3.
Select the network connection you want to modify.
4.
In the Tasks list, choose WINS.
5.
In the WINS servers list, select the IP address of the WINS server you want to delete,
and then choose Remove.
6.
In the WINS server address box, type the IP address of the WINS server, and then
choose Add.
7.
Repeat steps 4 and 5 for each WINS server IP address you want to add.
8.
Choose OK.
Change Administrator Password
The server appliance comes with a set of default accounts. Only the administrator account
has administrative privileges.
Chapter #5 - O/S 2.0 - Network Configuration
11/07/01 -- Revision 2.0.03A
Chapter #5 - O/S 2.0 - Network Configuration
162
Change Administrator Password
000001628
Advertisement
Table of Contents
