MaxAttach NAS 6000 Administration Guide
3.
Using the pull-down select one or more Volumes to preserve,
4.
Select the Read Only or Read/Write attribute,
5.
Select the Retention weight,
6.
Enter the Persistent image name.
7.
Click OK to create the persistent image or Cancel to abort the operation.
Deleting a Persistent Images
To delete a persistent image (snapshot), you must select an item from the Persistent Image
List then click the Delete button.
To delete a persistent image
1.
From the Menu bar, click Disks and Volumes, then click Persistent Images.
2.
On the Persistent Image List page, click the selector next to the persistent image to be
deleted.
3.
Click OK to delete the persistent image or Cancel to leave it intact.
Undoing Persistent Image Writes
To undo writes to a persistent image (snapshot), you must select an item from the Persistent
Image List then click the Undo Writes button.
To undo persistent image writes
1.
From the Menu bar, click Disks and Volumes, then click Persistent Images.
2.
On the Persistent Image List page, click the selector next to the persistent image to be
restored to its original state.
3.
Click OK to restore the image or Cancel to leave it intact.
Editing Persistent Image Properties
To change the read only attribute or preservation weight of an image select an image from
the Persistent Image List then click Properties in the task list.
Chapter #7 - Persistent Storage Manager
11/07/01 -- Revision 2.0.03A
Chapter #7 - Persistent Storage Manager
Managing Persistent Storage Manager Schedules
179
000001628