Maxattach Nas; Listing Of Supportedevents.inf; Instructions To Turn Amber Disk Status Leds Off; Instructions To Turn Amber Disk Status Leds On - Maxtor NAS 6000 Administration Manual

MaxAttach NAS 6000 Administration Guide

Listing of SupportedEvents.Inf

In its default factory setting, the SupportedEvents.Inf listing is as follows:
[Version]
Signature="$Windows NT$"
Provider="Maxtor"
[ONEVENT]
ONEVENT=10,12,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,54,57
[OFFEVENT]
OFFEVENT=1,2

Instructions to Turn Amber Disk Status LEDs Off

SupportedEvents.Inf
The
OFF whenever the following events occur. The information in parenthesis stands for
Gam_event number, User_event number, Priority level, and Severity level.
A hard disk has been placed online (1, 1, 4, Information)
n
A hard disk added as hot spare (2, 2, 4, Information)
n

Instructions to Turn Amber Disk Status LEDs On

SupportedEvents.Inf
The
ON whenever the described event occurs. The information in parenthesis stands for
Gam_event number, User_event number, Priority level, and Severity level.
Rebuild stopped with error. New device failed. (10, 10, 2, Error)
n
A hard disk has failed. (12, 12, 1, Serious)
n
A hard disk failed because write recovery failed. (33, 33, 1, Serious)
n
n A hard disk failed because SCSI bus reset failed. (34, 34, 1, Serious)
A hard disk failed because double check condition occurred. (35, 35, 1, Serious)
n
A hard disk failed because device is missing. (36, 36, 1, Serious)
n
A hard disk failed because of gross error on SCSI processor. (37, 37, 1, Serious)
n
A hard disk failed because of bad tag from the device. (38, 38, 1, Serious)
n
A hard disk failed because command to the device timed out. (9, 39, 1, Serious)
n
A hard disk failed because of the system reset. (40, 40, 1, Serious)
n
A hard disk failed because of busy status or parity error. (41, 41, 1, Serious)
n
A hard disk set to failed state by host. (42, 42, 1, Serious)
n
A hard disk failed because access to the device met with a selection time out. (43, 43, 1,
n
Serious)
A hard disk failed because of a sequence error in the SCSI bus phase handling. (44, 44,
n
1, Serious)
A hard disk failed because device returned an unknown status. (45, 45, 1, Serious)
n
Chapter #14 - Appendix - Disk Array Error Codes
11/07/01 -- Revision 2.0.03A
file instructs the system to turn the amber Disk Status LED
file instructs the system to turn the amber Disk Status LEDs
281
Chapter #14 - Appendix - Disk Array Error Codes
Listing of SupportedEvents.Inf
000001628