Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
Adding a DNS suffix is optional; however, if you want to set or change the name of your server
appliance, this is the only box from which you can do so.
4.
Select whether the client computer will be part of a workgroup or a domain.
5.
If the machine will be part of a domain, type the user name and password of the
person who has permission to add client computers to the domain.
6.
If the server appliance is accessible to AppleTalk or NetWare clients, type the
AppleTalk or NetWare name in the appropriate box.
7.
By default:
The AppleTalk name of your server appliance will be the same as the standard
n
server appliance name
The NetWare name must be different from the server appliance name.
n
The NetWare name will be the server appliance name with _NW appended to
n
it.
8.
Any changes to the server appliance name will update the Netware and AppleTalk
names as well.
9.
Choose OK.
10. When prompted to reboot the server appliance, you may either accept or cancel the
reboot.
If you choose OK, the server appliance will reboot and the Restarting page will
n
appear. When the server appliance has restarted, the Home Page of the Web
user interface (UI) will display and your changes will be in effect.
If you choose Cancel, the changes to the server appliance identity will not take
n
effect until the next reboot.
Chapter #5 - O/S 2.0 - Network Configuration
11/07/01 -- Revision 2.0.03A
NOTE
Related Topics
•
DNS Name Resolution
•
DNS Suffixes
•
Domain
•
Server Appliance Name
•
Workgroup
Chapter #5 - O/S 2.0 - Network Configuration
133
Network Identification
000001628
Advertisement
Table of Contents
