MaxAttach NAS 6000 Administration Guide
8:
Install EMU Cables
In this section, you will connect the Base Unit CPU to the Environmental Monitor Unit
(EMU) mounted in each enclosure unit.
Figure #4
EMU Cable on Base Unit Installation
1.
Install the Base Unit EMU Cable.
Short Male/Male (M/M) serial cable
n
Start at EMU left side EXT1 port
n
Connect to CPU I/O Panel Serial Port 1.
n
Connect Base Unit to First Expansion Unit
n
Chapter #1 - Installation - Rack Mounting Your NAS 6000
11/07/01 -- Revision 2.0.03A
NAS 6000 EMU Cable Connections
Chapter #1 - Installation - Rack Mounting Your NAS 6000
1: User-Supplied Materials and Services
7
000001628