MaxAttach NAS 6000 Administration Guide
The second Expansion Unit is The second Expansion Unit comes unconfigured from
n
the factory.
At the end of the installation process, the drives are configured using the GAM.
n
The figure below shows the drives in the recommended default RAID 5 configuration
n
Figure #9
Drive I:\ and Drive J:\
Drives I:\ and J:\ are available for user data. The default configuration for both drives is
RAID 5. The RAID 5 arrays for both drives can changed to other RAID configurations.
Chapter #4 - Overview - NAS 6000 Disk Array
11/07/01 -- Revision 2.0.03A
Expansion Unit Two User Data Drive Arrays
Chapter #4 - Overview - NAS 6000 Disk Array
Second Expansion Unit User Data Arrays
127
000001628