Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
Enabling Sharing Protocols
n
Disabling Sharing Protocols
n
Configuring Sharing Protocol Properties
n
Setting NFS Sharing Protocols
n
Adding NFS client Groups
n
Editing NFS client groups
n
Removing NFS client groups
n
Setting NFS Locks
n
Setting NFS User and Group Mappings
n
Enabling NFS Simple Maps
n
Configuring NFS Explicit User Maps
n
Configuring Explicit Group Maps
n
Setting FTP Sharing Protocol
n
Setting Web HTTP Sharing Protocol
n
Setting Netware Sharing Protocol
n
Setting AppleTalk Sharing Protocol
n
Overview of Supported Protocols
A folder on your MaxAttach NAS 6000 can be shared with others on the network,
whether those computers are running a Microsoft Windows operating system (OS) or a
UNIX OS.
Supported Protocols
The MaxAttach NAS 6000 can support the following protocols:
Windows (CIFS): The Common Internet File System (CIFS) protocol is used by
n
clients running a Windows OS.
NFS: The Network File System protocol is used by clients running UNIX.
n
FTP: The File Transfer Protocol is an alternative way of accessing a file share from
n
any OS.
HTTP: The Hypertext Transfer Protocol is the protocol for accessing a file share
n
from Web browsers.
NetWare: The protocol for accessing a file share from clients running NetWare.
n
AppleTalk: The protocol for accessing a file share from Macintosh clients.
n
When you create a share on the MaxAttach NAS 6000, you can enable any or all of the
listed protocols currently enabled or installed on your server appliance.
Chapter #8 - O/S 2.0 - Folders and Shares
11/07/01 -- Revision 2.0.03A
Chapter #8 - O/S 2.0 - Folders and Shares
Overview of Supported Protocols
185
000001628
Advertisement
Table of Contents
