Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
3.
Select FTP Protocol, and then choose Properties.
4.
Select the Anonymous Access tab.
5.
Select the Enable Anonymous Access check box, and then choose OK.
Disabling FTP Anonymous Access
To disable FTP anonymous
1.
On the primary navigation bar, choose Shares.
2.
Choose Sharing Protocols.
3.
Select FTP Protocol, and then choose Properties.
4.
Select the Anonymous Access tab.
5.
Clear the Enable Anonymous Access check box, and then choose OK.
Adding Custom FTP Messages
You can create customized welcome and exit messages that are sent to users when they
connect or disconnect from the server appliance.
To add custom messages
1.
On the primary navigation bar, choose Shares.
2.
Choose Sharing Protocols.
3.
Select FTP Protocol, and then choose Properties.
4.
Select the Messages tab.
5.
In the Welcome message box, type the message that will greet users when they
connect to the server appliance.
6.
In the Exit message box, type the message that will appear when users disconnect
from the server appliance.
7.
Choose OK.
Chapter #8 - O/S 2.0 - Folders and Shares
11/07/01 -- Revision 2.0.03A
Related Topics
Chapter #8 - O/S 2.0 - Folders and Shares
218
FTP Sharing Protocol
000001628
Advertisement
Table of Contents
