Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
2.
Click Maintenance on the main menu bar.
3.
Select Terminal Services. A terminal services session starts.
4.
Log in to Windows 2000.
5.
On the Windows Start menu, select Settings > Control Panel. The control panel
displays.
6.
Double-click the Scheduled Tasks icon. This opens the scheduler.
7.
Right-click BackupMaxAttach6000.bat and select Properties.
8.
On the Schedule tab, clear the Enabled (scheduled task runs at specified time)
checkbox.
9.
Click OK.
Manual Back Up
You can back up the MaxAttach NAS 6000 system before its scheduled time, for example,
if you are about to make changes to the system and want to make a backup before you
begin.
To immediately back up the system
1.
Log in to the MaxAttach NAS 6000 as administrator.
2.
Click Maintenance on the main menu bar.
3.
Select Terminal Services. A terminal services session starts.
4.
Log in to Windows 2000.
5.
On the Windows Start menu, select Run.
6.
Type the following in the Run field: D:\backupmaxattach6000. The backup
program runs, displaying various dialog boxes and messages. No user intervention is
required.
7.
When the program completes, exit from terminal services.
Chapter #10 - O/S 2.0 - Maintenance
11/07/01 -- Revision 2.0.03A
237
Chapter #10 - O/S 2.0 - Maintenance
Manual Back Up
000001628
Advertisement
Table of Contents
