MaxAttach NAS 6000 Administration Guide
5.
Choose OK.
To log client visits to an FTP share
1.
On the primary navigation bar, Choose Shares.
2.
On the Shares page, choose Shares.
3.
Select the share for which you want to add FTP client access, and then choose
Properties.
4.
Select the FTP Sharing tab.
5.
Select the Log visits check box.
6.
Choose OK.
Setting Web HTTP Share Properties
Use this page to specify which HTTP clients are granted access to each share. Access can be
granted or denied on the basis of client host name. Access can also be granted or denied on
the basis of client groups, where a client group contains one or more client host names.
To allow clients permission to a Web share
1.
On the primary navigation bar, choose Shares.
2.
On the Shares page, choose Shares.
3.
Select the share for which you want to add HTTP client access, and then choose
Properties.
4.
From the General tab, select the Web (HTTP) check box.
5.
Select the HTTP Sharing tab, and then:
Select the Read check box to allow read access.
n
—OR—
Select the Write check box to allow write access.
n
Chapter #8 - O/S 2.0 - Folders and Shares
11/07/01 -- Revision 2.0.03A
•
You may choose to allow read-only, write-only, or
read/write permissions.
Chapter #8 - O/S 2.0 - Folders and Shares
201
Managing Shares
000001628