Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
Note The new administrator password must conform to any password complexity rules in effect for
the domain to which the server appliance belongs.
6.
Retype the new administrator password in the Confirm new password box.
7.
Choose OK.
To change the administrator account name
1.
Log on to the server appliance as Administrator.
2.
Choose Network.
3.
Choose Administrator.
4.
Type the new name for the administrator account in the User name box.
5.
Choose OK.
Administration Web Site
This feature allows you to change the IP address(es) and port that can be used to access the
administration Web site on the server appliance.
The default IP address to which the server appliance responds, or listens, is typically
changed when the server appliance is only managed on a certain subnet or a separate
management network.
The default listen ports for both encrypted and non-encrypted access can be modified as
needed to work with existing network software and configurations, for example, when no
traffic above a given port number is allowed.
Chapter #5 - O/S 2.0 - Network Configuration
11/07/01 -- Revision 2.0.03A
NOTE
Related Topics
•
Configuring Network Attached Storage
•
Configuring a Web Server Appliance
Chapter #5 - O/S 2.0 - Network Configuration
164
Administration Web Site
000001628
Advertisement
Table of Contents
