MaxAttach NAS 6000 Administration Guide
To set or change the workgroup membership of the server appliance
1.
On the primary navigation bar, choose Network.
2.
Choose Identification.
3.
Select the Workgroup button and type the name of the workgroup to join.
If the server appliance belonged to a domain before you joined the workgroup,
n
the server appliance will be disjoined from the domain and the computer
account will be disabled.
4.
Choose OK.
5.
You will be asked to reboot the server appliance.
6.
Choose whether to reboot the server appliance.
If you choose OK, the server appliance will reboot and a page will appear
n
indicating that the server appliance is restarting.
When the server appliance is back online, the default page of the Web UI will
n
display and your changes will be in effect.
If you choose Cancel, the changes to the server appliance identity will not take
n
effect until the next reboot.
Network Global Settings
From this page, you can change the overall network settings for your server appliance by
configuring the IPX settings as well as specifying the DNS suffixes and the LMHOSTS and
HOSTS file to use. These files can be used to resolve the names of any computer or device.
Note that the DNS suffix used here applies when the server appliance is trying to resolve a
host or domain name.
To automatically set or change DNS suffixes
1.
On the primary navigation bar, choose Network.
2.
Choose Global Settings.
3.
Select the DNS Resolution tab.
4.
Select the Append primary DNS suffix button.
5.
Optional: you may choose to Append parent suffixes of the primary DNS suffix by
selecting the check box.
Chapter #5 - O/S 2.0 - Network Configuration
11/07/01 -- Revision 2.0.03A
Chapter #5 - O/S 2.0 - Network Configuration
136
Network Global Settings
000001628