Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
The purpose of this property page is to allow you to enter the addresses of external DNS servers.
The server appliance does not contain a DNS server.
For example, a workstation configured to use DNS name resolution could use the
command ping remotehost rather than ping 1.2.3.4 if the mapping for the system named
remotehost was contained in the DNS database. DNS domains should not be confused
with Microsoft Windows domains.
In the DNS client-server model, the server containing information about a portion of the
DNS database, the portion that makes computer names available to clients, queries for
name resolution across the Internet.
To set the server appliance to automatically obtain DNS server
information from a DHCP server
1.
On the primary navigation bar, choose Network.
2.
Choose Interfaces.
3.
Select the network connection you want to modify.
4.
In the Tasks list, choose DNS.
5.
Select the Obtain configuration from DHCP server button.
6.
Choose OK.
To manually set the DNS servers to be used by the server appliance
1.
On the Network page, choose Interfaces.
2.
Select the network connection you want to modify.
3.
In the Tasks list, choose DNS.
4.
Select the Configure manually button.
5.
Type the appropriate IP address in the box next to the Add button, and then choose
Add.
6.
To add another DNS server, repeat step 5.
Chapter #5 - O/S 2.0 - Network Configuration
11/07/01 -- Revision 2.0.03A
NOTE
Chapter #5 - O/S 2.0 - Network Configuration
139
DNS Configuration
000001628
Advertisement
Table of Contents
