Table of Contents
Advertisement
MaxAttach NAS 6000 Administration Guide
To set the session timeout interval
1.
Using Internet Explorer, log in to the MaxAttach as administrator.
2.
Click Maintenance.
3.
Select Session Timeout. This opens the Session Timeout page.
4.
In the Session Timeout Interval field, type the number of minutes you want to the
system to wait before it automatically logs out. The timeout range is from 1 minute
to 1440 minutes (one day). If you want to deactivate the timer, enter 0.
5.
Click OK.
Setting Alert E-Mail
Your server appliance can be configured to generate an automatic e-mail notification when
an alert is raised. You can choose to be notified when any type of alert is raised or only for
specific alert types, such as informational, warning, or critical alerts.
This feature uses the SMTP service in the server appliance to send e-mail. In a normal
Internet environment, you do not need to configure an SMTP gateway. However, to send
e-mail to Microsoft® Exchange Server or Lotus Notes, you need to provide the name of
the specific SMTP gateway. You must put the SMTP gateway server name, or IP address,
in the SMTP server field in the Web user interface (UI). Contact your Microsoft Exchange
administrator for the server name of the SMTP gateway.
To set the alert e-mail feature
1.
From the primary navigation bar, choose Maintenance.
2.
Choose Alert E-Mail.
3.
Select the Disable sending alert e-mail button.
- OR -
1.
Select the Enable sending alert e-mail button, and then select the check boxes for the
circumstances under which you want alert e-mail to be sent.
2.
In the To box, type the system administrator's e-mail address.
Chapter #10 - O/S 2.0 - Maintenance
11/07/01 -- Revision 2.0.03A
239
Chapter #10 - O/S 2.0 - Maintenance
Setting Alert E-Mail
000001628
Advertisement
Table of Contents
