MaxAttach NAS 6000 Administration Guide
3.
Select the protocol you want to enable.
4.
In the Tasks list, choose Enable.
Disabling Sharing Protocols
To disable sharing protocols
1.
On the primary navigation bar, choose Shares.
2.
Choose Sharing Protocols.
3.
Select the protocol you want to disable.
4.
In the Tasks list, choose Disable.
Configuring Sharing Protocol Properties
Use the property page of the designated protocol to configure the desired network
protocols.
To configure network protocol properties
1.
On the primary navigation bar, choose Shares.
2.
Choose Sharing Protocols.
3.
Select the protocol you want to configure.
4.
In the Tasks list, choose Properties.
Chapter #8 - O/S 2.0 - Folders and Shares
11/07/01 -- Revision 2.0.03A
Related Topics
•
Configuring Protocol Properties
•
Disabling Protocols
Related Topics
•
Configuring Protocol Properties
•
Enabling Protocols
Chapter #8 - O/S 2.0 - Folders and Shares
206
Managing Sharing Protocols
000001628